Thin Veneer Installation Live Demo and Training Event With Laticrete


Thin Veneer Installation Live Demo and Training Event With Laticrete, a supplier of natural thin stone, will be featuring its Boston Blend Mosaic at Laticrete Masonry Veneer Installation Contractor Training Days. This three-day event will occur June 10-12, 2013, and will be held in Ogunquit, Maine.

Over the three days, natural stone will be installed on the exterior of a new home. This live demo and contractor training is open to all contractors, architects, homeowners, and resellers who are interested in learning more about the installation of thin stone veneer. This is a free event that includes a daily BBQ lunch and door prizes,

Some of the the most frequently asked questions when it comes to thin veneer center around how to install it. To answer these questions and many others, is teaming up with Laticrete International Inc. to provide a live demonstration and contractor training.

“There is no better way to learn than hands on in the field,” says’s David Croteau. “Over the three days, you will be able to see from start to finish how our natural stone thin veneer is installed in an exterior application. The Laticrete Masonry Veneer Installation System is the perfect choice for installing outside.”

Laticrete International Air & Water Barrier, Hi-Bond Masonry Veneer Mortar, and Premium Pointing Mortar all come with a 25-year warranty. The Boston Blend Mosaic consists of New England fieldstones that have been gathered from local farms and fields. These stones have been exposed to the elements and have gone through many freeze/thaw cycles over the last 100 years.

The demo and training event is going to be held from 8 a.m. to 5 p.m. at 43 Sea Oaks Lane, Ogunquit, Maine. Parking is available in the Perkins parking lot on Shore Road, Ogunquit, Maine (a five-minute walk from the event).


S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit:

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...