RSS
TwitterFacebookGoogle+YouTubeLinkedIn

BASF Insulation Product Meets ASTM Requirements

Facebooktwittergoogle_plusredditpinterestlinkedinmail

BASF Insulation Product Meets ASTM Requirements

BASF announced that the Neopor 5300 insulation material (EPS, expandable polystyrene) has met the American Society for Testing and Materials (ASTM) C578 Type I, II, VII and IX requirements for Rigid Thermal Insulation. This performance capability is recognized in the International Code Council Evaluation Service (ICC-ES) Report #2784.

Neopor contains special graphite particles that reflect heat radiation like a mirror, therefore reducing heat loss in a building. Neopor is specified by experts for use as above- and below grade continuous exterior insulation and as thermal insulation in other building products used in walls, floors and roofs.

ICC-ES thoroughly examined BASF’s product information, test reports, calculations, quality control methods and other factors to ensure that the Neopor insulation product is code-compliant. Building officials, architects, contractors, specifiers, designers and others rely on ICC-ES Evaluation Reports to provide a basis for using or approving products, including those made with Neopor rigid thermal insulation, in construction projects under the International Building Code.

Neopor rigid thermal insulation economically meets insulation code requirements at industry standard thicknesses, thus demonstrating eco-efficiency, durability, vapor permeability and low water absorption. Using low density Neopor insulation (Type I) manufactured from Neopor 5300 enables the final building product to be more sustainable.

Compared to other rigid insulation boards, Neopor uses less material to achieve the same R-value. For a given R-value, Neopor can be made thinner than white EPS and less dense than XPS. For example, a 2,200-square-foot house using Neopor Type I continuous insulation in place of 15 psi XPS can save up to 32 pounds of insulation.

Through the Neopor Brand Marketing Program, Neopor insulation products can be accessed via a national network of authorized, qualified and certified Neopor manufacturers. For more information, visit www.neopor.basf.us/where-to-buy or write to BASF at www.neopor.basf.us.

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...