Finding Your Guy: Managing Quality For Your Projects


Flashing and Drainage

air barriers are no longer the up-and-coming wall barrier

The masonry industry constantly is dealing with changes. This year, we saw the new Energy Code become a more popular part of our wall construction. Moisture management has become a topic of discussion on its own; mortar has been improved and accepted as a standard when used with the silo dispensing system; and custom color matching of patching products is an everyday thing. And, air barriers are no longer the up-and-coming wall barrier we all must learn about. They are here to stay.

With all the changes mason contractors must become familiar with and experts on, the key to success hinges on every mason contractor having that one guy who will pull him through the project. That one employee who has, time and time again, built projects that had all sorts of issues handled in the field, as if they were no problem.

Now, I mentioned “one guy,” not six or three guys. Why? Because they are very hard to find. Once you have one of these guys on the payroll, you will do whatever it takes to keep him and clone him. He is a part of your quality that you do not need to manage, and it is built in.

Flashing and Drainage

Other ways to build in quality to your projects is to use products that take the human factor and reduce it to a level that can be managed using people who are far less talented than “that guy.” Pre-blended mortar has become popular to use for many reasons. The product has superior cement-to-sand ratio based on weight, not volume. The final product is consistently the same color, same texture, and has the same consistency with each batch. Not having clumps and trash that come from shoveling sand on a jobsite also is a plus.

What makes the silo dispensing system so useful is that the labor will not forget to cover the mortar pile at the end of each day; back injuries from shoveling sand are reduced; and site cleanup is much easier and less expensive – all with a product that consistently can be produced to a high level of quality, using an employee who is not “your guy.”

Flashing and Drainage

Patching on a masonry project of any size typically is not a big deal. But, depending on where the patch needs to be placed, it can be. A large Indiana Limestone cornice that has a big chip in the corner of the unit will never pass the punch list. Using Cathedral Stone patching mortars, custom formulated patches can be made based on your site sample.

This places the mixing time and color matching in the hands of highly trained chemists, saving you, the mason, materials and labor dollars to mix and create samples and drying/curing time. This is performed for you, for your convenience, to aid you in offering your client a perfect match. You can complete the punch list and get paid.

Sure, you could perform this task the conventional way, but why would you want to spend the time hoping to get it correct, when the manufacturer does this for you? Cathedral Stone takes a complicated patch and simplifies it. The company becomes “that guy.”

Air barriers entered the market years ago, with the technology that was superior to damp proofing and felt paper. But that did not make it an easy sell. There are many aspects to the air barrier industry that take it to many levels requiring certifications and training. However, many mason contractors are well equipped to take on the installation part of the air barrier system. Not all jobs are candidates for the mason contractor, but jobs you can add to your bottom line provide added value to the general contractor when comparing sub-contractor quotations.

FFreedom Flashing Products Inc.’s patented Quick-Fit End Damreedom Flashing Products Inc.’s patented Quick-Fit End Dam was selected as the best new product in the masonry category of the Most Innovative Product awards program at the 2013 World of Concrete exposition. The Quick-Fit End Dam has a moveable web and adjustable rear leg that makes it easy to create a superior water seal, even where masons find cavity variations between inner and outer wall components. The Quick-Fit End Dam also is seamless, which enhances the durability of the window flashing.

“It is truly an honor for our young company to receive this recognition for innovation,” says Michelle Draghicchio, president of Freedom Flashing Products in Menomonee Falls, Wis. “Our focus is to develop smart, simple and seamless flashing products for the building and construction industry. Winning this award demonstrates that we are listening to masons and delivering a product that makes it easier for them to do a better job while decreasing costs.”

The Quick-Fit End Dam earned the Experts’ Choice award at the exposition, which is the industry’s largest annual event. More than 50,000 professionals attended the show, and nearly 1,300 companies exhibited, including Freedom Flashing Products.

The Most Innovative Product contest recognizes new products that promise to boost productivity, efficiency and quality in construction. Winners are selected based on votes received by show attendees, a panel of industry experts, and industry media editors.

For more information, visit

It could be the difference between an award and an “almost.” Many mason contractors feel they know just enough to get in trouble with air barriers. But manufacturers are willing to train the mason contractor and provide all the information required to make him successful in his projects.

Manufactures, independent representatives and technical support all work for you. They can inform you of compatibility issues, component choices, penetration procedures and sealant requirements, just to mention a few of the topics for which they can provide assistance. The air barrier manufacturer can inspect your job and make recommendations to assist you in obtaining your warranty. The manufacturer and his team then become “your guys.”


Moisture management is another topic that sounds confusing, but really is not. Moisture management is moving the water that gets into our walls back to the outside, using flashings and weeps. Flashings and weeps have evolved during the last 20 years, becoming better and more efficient. Mortar Net Solutions has created a “that guy” flashing that takes the human factor out of most of the installation.

For instance, TotalFlash does not have to be specified for a contractor to use this product on jobs. They do the same thing in a factory for nearly the same price as conventional flashing, yet offer a labor savings and an incredible warranty. This service allows the project management and the building owners to know that their flashings will include the mortar collection, term bar, proper length of membrane and the drip edge. Nothing will be forgotten or skimped on.

Using one of Mortar Net Solutions’ four membranes, or one of your choices, the TotalFlash System includes having one of Mortar Net Solutions’ engineers perform a take-off, free of charge, for your job – detailing the masonry openings and providing a lintel cut list for your job.

Flashing and Drainage

Flashing and Drainage


Taking it one step further, they will pre-cut your flashing panels for no additional expense to your project. With all of the individual pieces required to install a complete moisture management system, it is important for a mason contractor to consider end dams and corner boot components as a major part. When end dams, corner boots and specialized sealants are specified, it is a common first thought to think of ways to “make them yourself” or maybe “you can do without those.” But, the reality is that, if you compute the labor and material dollars to the purchase price the factory made components, they generally are faster to install and do not have any seams for leaks to occur.

The industry has many things that have changed in the last 20 years. Building great projects with a great team has not changed. However, now, manufacturers offer teammates as a part of their service specializing in their discipline, allowing you one more “guy” on your team.

One thing that will never change is the pride masons have in every unit we lay, and the hard day of work in which we all participate. The love of being in the masonry industry in the United States of America is real.

Related Posts

  • 61
    July 2014 Air Barriers and Insulation Fluid Applied Air and Water Barriers: The Science Behind the Product By Arthur Mintie Figure 1. Shown is a typical commercial project utilizing a fluid applied air and water barrier in conjunction with a natural stone veneer finish. Photo courtesy of LATICRETE International Inc.…
    Tags: air, water, building, barrier, product, barriers, management, moisture
  • 60
    Flashing and Drainage By Jeremy Douglas The flashing and drainage plane has always been a critical component of any cavity wall system, diverting moisture outward as it collects in the cavity space to the exterior of the façade through the weep openings. A failure in this arrangement can ultimately lead…
    Tags: flashing, wall, masonry, weeps, code
  • 46
    January 2015 Air Barriers and Insulation Long-Term Energy Savings Through Cavity Wall Systems By Chris Tobias A completed Firestone Building Products Enverge CI Foil Exterior Wall Insulation project at the University of Colorado, Denver, has the highest R-Value per inch compared to other wall insulation products. Mason contractors are all…
    Tags: wall, building, products, barrier, air, energy, installation, management, moisture
  • 44
    December 2015 Will You Accept the Call to Serve? By Melonie Leslie I can’t remember a time when I wasn’t a part of the masonry industry. I have participated and contributed at many levels for our local and national associations. But, I had never ventured to Washington, D.C., to try…
    Tags: industry, masonry, will, time
  • 41
    June 2010 Flashing & Drainage The Role of Flashing in Masonry Somerset House, circa 1755 By Jeremy Douglas We tend to think of bricks, blocks and mortar as some of the most durable building materials ever known to man. Throughout history, monuments, public facilities, and even our homes have been…
    Tags: flashing, wall, moisture, mortar, construction, will, masonry, water


Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Bill Dentinger 2015 Inductee MCAA Hall of Fame

Bill Dentinger 2015 Inductee MCAA Hall of Fame

John Smith, Jr.

John Smith, Jr. receives the 2015 MCAA C. DeWitt Brown Leadman Award

2015 MCAA Fastest Trowel On The Block Winner

2015 MCAA Fastest Trowel On The Block Winner

Daniel Furr 1st Place Winner

Daniel Furr 1st Place Winner (First Year), Masonry Skills Challenge

Synpro Products

Masonry Magazine Video News Interview: Michael Goyne

Hydro Mobile Inc

Interview with Kevin O'Shea of Hydro Mobile, Inc.

Interview with Mark Kemp – Chairman, MCAA

Interview with Masonry Contractors Association of America Chairman, Mark Kemp

Mortar Net Solutions

Interview with Steve Fechino from Mortar Net Solutions

Pullman Ermator

Interview with Lyndon Kelsey of Pullman Ermator

Keene Building Products

Interview with Jim O'Neill of Keene Building Products