Author: Masonry Magazine

SPONSORED: Innovative solution is the only complete flashing system specifically for 6-inch, single-wythe CMU walls.

Mortar Net Solutions introduced a new 6-inch size of its BlockFlash™ flashing solution for single-wythe exterior concrete masonry unit walls. BlockFlash is a complete, embeddable flashing solution for managing moisture in CMU walls. It uses patented flashing pans to collect moisture in the wall and channel it to the exterior through integrated weep spouts. The spouts are gray in color to blend in with standard mortar, and factory-installed insect guards prevent insects from entering the block cells through the spouts. Drainage mesh placed in every block cell in the course immediately above the pans provides hundreds of clear pathways for water to flow around mortar droppings inside the cells, where it is collected by the pans. Mortar Net’s BlockFlash cuts installation time associated with using membrane flashing by approximately 50 percent and eliminates the need for multiple architectural CMU sizes that are typical with through-wall flashing. BlockFlash for 6-inch CMU works the same as the 8-, 10- and 12-inch versions, and was designed to meet the growing popularity of utilizing 6-inch CMUs in building construction to help meet building energy codes and for its space-saving benefits in larger buildings. For more information, please click here to visit Mortar Net...

Read More

Marvelous Masonry-Czech Republic- Celebrating Masonry’s Heritage

From Egypt last month, we now move up to the Czech Republic in Central Europe.  As with most European countries, it has an amazing history including being part of various empires. During World War II, it was part of Czechoslovakia. However, Czechoslovakia was peacefully dissolved in 1993 and the independent states of the Czech Republic and Slovakia were formed.  In the past year, the country has adopted the short name of Czechia in addition to the formal name of Czech Republic. Czechia is one of Europe’s 16 land-locked countries (Figure 1).    In size, it is slightly smaller than...

Read More

Past, Present And Future: April

Past, Present And Future Dan Kamys, Editor – dkamys@masonrymagazine.com What a whirlwind of a year it’s been. As I’m writing this, I’m currently attending the CONEXPO-CON/AGG 2017 Conference in Las Vegas. I thought the World of Concrete was a large show, but this one makes it look small! From the cranes that look like they’re touching the sky to the gigantic dump trucks that could probably hold all the contents of my house, the construction industry looks like it’s certainly on the way up. It was a pleasure to meet all of the new companies dedicated to the same...

Read More

Field Purchasing of Specified Products

Words: Steven Fechino, Engineering and Construction Manager at Mortar Net Solutions Photos: PROSOCO, Mortar Net Solutions, Spec Mix, Masonry Magazine Purchasing the materials for a project is not intended to be complicated, but with all of the products to choose from, it can become a bit of an education many superintendents do not think they have time. Specifications and submittals should answer many of the questions, but once in a while the mason can feel like he is guessing. One thing about the products we use is that they have improved in their chemistry and performance over the past...

Read More

Restoring History: The Mill at Middletown

Words: Dan Kamys Photos: Barkow Photo Masonry is a fascinating industry as you’ve seen in David Biggs’ Marvelous Masonry series in this magazine. But, a tremendous amount of restoration work is done at home. That’s why The Mill at Middletown, which took an abandoned hat factory in Orange County, New York and turned it into a stunning affordable housing complex, definitely seemed worth some coverage. This historic $15 million project, designed by Magnusson Architecture and Planning, PC, who also designed Creston Avenue Residence, featured in our January issue, was not easy to complete. However, the end product is truly worth...

Read More