RSS
TwitterFacebookGoogle+YouTubeLinkedIn

State of the Mast Climbing Work Platform Market

facebooktwittergoogle_plusredditpinterestlinkedinmail

Mast Climbers, Cranes and Telehandlers

The last couple of years have been tough for all of us in the construction industry. Mast climbing work platform manufacturers have been hit particularly hard. A major part of the U.S. market development consisted of a strong mason contractor’s user base. With the volume of work drastically down, we have seen a massive number of used platforms hitting the market, due to contractors getting out of business or getting rid of equipment in order to get through the crisis. Contractors and renters both were hesitant to renew their fleets, due to the economic downturn and the fact that they could get their hands on good-condition equipment at a very low price.

Even though the volume of used equipment available is slowly declining, and we are starting to see slow improvement in the economy, most contractors still are hesitant to go out and purchase new mast climbing work platforms. One key element to increase business volume and profitability as the market picks up is to find the right balance between used, new and rental equipment without jeopardizing the short-term viability of the company.

State of the Mast Climbing Work Platform Market

Bigger contractors and renters generally have a targeted average fleet age, in order to keep some form of balance and optimize their return on investment. New equipment requires less maintenance and usually is more efficient, while older equipment often means increases downtime and maintenance costs but generates more profit as it is often paid for and amortized. A healthy mix of both worlds usually allows companies to maximize profit, while minimizing their risk.

Telehandlers to Watch
Two New Models to the MT Series of Telescopic Handlers

Manitou has added the models MT 10044 and MT 12042 construction telescopic handlers to its MT Series line-up for North American markets. The MT 10044 telescopic handler has a rated lift capacity of 10,000 pounds and a maximum lift height of four feet. The MT 12042 boasts a rated lift capacity of 12,000 pounds and a maximum lift height of 42 feet.

The booms of the models MT 10044 and MT 12042 telescopic handlers have a welded box-section design, which means it is stronger than the booms in comparable competitive models.  Maximum operating capacity is achieved with optional outriggers on the MT 12042 for added stability.

The patented Personnel Work Platform (PWP) Safety System is available as an option on both models. The system allows the use of an ANSI/ITSDF B56.6-compliant personnel work platform, commonly used by framers, roofers and siding contractors. The PWP System adds versatility, making many jobs almost as easy as working at ground level.

A rear axle stabilizer system improves stability by locking the rear axle in position whenever the boom is raised more than 60 degrees, if the parking brake is applied, or if the PWP System is activated.

Other design features include a heavy-duty frame with reinforced C-channels, internal wet disc brakes for better stopping ability and longer life, and a SAHR (Spring-Applied, Hydraulic-Release) parking brake, which automatically applies the parking brake when the engine is shut off, or manually by pressing a rocker switch.

The ROPS/FOPS canopy and cab include pilot-assisted controls that are easy to reach and easy to operate, allowing the operator to perform precise placements and increase productivity.  The view from the cab is a full 360 degrees.

For applications that require operator protection from the weather, these units can be equipped with the optional glass-enclosed cab with heater/defroster. And, a transmission de-clutch feature is standard and an additional work light package and suspension seat are optional.

The MT 10044 and MT 12042 telescopic handlers are powered by Interim Tier IV-compliant turbocharged diesel engines with 115 horsepower. Both models are equipped with a four-speed power-shift transmission, three steering modes and a quick carriage release tool-mounting system. For more information, visit www.manitou.com.

During hard times, companies usually are willing to take the risk of keeping their equipment longer. They can maximize the return on their investment, while not getting the financial burden of adding new equipment to their fleet. Contractors trying to stretch their fleet age often have the tendency to also minimize preemptive maintenance. This will allow generating more profit in the short term, if the equipment doesn’t cause extra down time. This strategy often will catch up on you at some point in time but can be viable in the short term.

Let’s not forget that mast climbers are mainly used to the increase in productivity. An unreliable unit that causes downtime annihilates the advantages of the product, so investing in keeping units in good working condition is a short-term expense but a sound investment when looking at the global picture. This also keeps a higher market value for the products you own.

Besides the equipment that they own, contractors turn to renting equipment in order to answer needs during peeks periods. In harder economic times, masons rely more heavily on rental as they are not willing to take the risk of purchasing equipment that might be sitting after the next contract is over. This is exactly what the industry has been experiencing during the last years. Even though rental reduces the contractor’s risk, it also reduces its profit if the equipment could be kept busy enough during the year.

Product Spotlight
Z-45/25 Rough Terrain BoomThe Genie Z-45/25 rough terrain articulating boom lift is a redesigned, 45-foot boom that combines the latest performance technology with new service features to further enhance the most popular member of the Genie boom family. The new Z-45/25 RT currently is in production and available to the ANSI market. The CE version of this model is slated for production in Italy in mid-2013.

Key performance features include an updated drive system, which produces 24 percent more tractive effort than the previous model, resulting in greater terrainability, and provides true four-wheel drive and four-wheel braking. The Z-45/25 RT offers a maximum working height of 51 feet, 10 inches, and an up-and-over clearance of 23 feet, five inches. With a 500-pound lift capacity, the unit can position workers and tools exactly where they need to be. It also is a lighter weight machine than before, providing reduced floor loading and greater maneuverability and jobsite performance. Compared to its predecessor, overall weight has been reduced by up to 1,100 pounds for jib models and 575 pounds for non-jib models.

The new Z-45/25 rough terrain boom lift also offers owners simplified serviceability and lower cost of ownership. Larger doors and swing-out trays provide access to the front and back of the engine compartment, as well as to filters and electrical components for faster maintenance and troubleshooting. Cost of ownership is reduced through less-expensive replacement parts, such as the unit’s smaller standard tires, and increased parts and component commonality across similar Genie booms. For more information, visit www.terex.com.

We are presently at a key point in time, when contractors are starting to position themselves to maximize their market shares in a slow and fragile growth. Already, we are seeing key players starting to position themselves. Some companies are starting to invest more in equipment maintenance; others have started purchasing equipment to renew their fleet. This should cause another round of increase in the used equipment availability, but also should cause the introduction of more new equipment in the market. We also are starting to see a small decrease in the proportion of equipment rented, versus equipment owned for contractors who are having more confidence in keeping their equipment busy on the jobsite in the longer term. It is clear that the contractors who will best handle their equipment needs will give themselves an edge that should help them grow faster and get more market shares in the upcoming years.

State of the Mast Climbing Work Platform Market

For smaller contractors, the market still is favorable to acquiring second-hand mast climbing work platforms to grow their fleets and increase productivity. It also can be an opportunity to introduce the product in their equipment fleet to better position themselves for future growth. Although there are some great deals out there, contractors must be careful when purchasing used equipment. Indeed, there are some key elements to consider in purchasing a used platform in order to optimize the long-term investment.

First off, knowing the equipment past history is important as it will allow you to know what you can expect for the upcoming years. Secondly, it is important to assure that parts are easily available for the product and that you can have manufacturer’s support in case of recall or any other problems. In the same line of thinking, being able to easily find compatible equipment, both new and used, should be an important element in the decision-making process. Finally, making sure that there is an authorized dealer in your area is key, when you need additional equipment, rental equipment, parts, support or training.


Thierry Lachapelle is marketing and sales director for Hydro Mobile Inc. www.hydro-mobile.com. Hydro Mobile is a privately owned corporation involved in the design, manufacturing and distribution of mast climbing work platforms for the construction industry. For more information, call 888-484-9376.


Related Posts

  • 59
    August 2014 Mast Climbers Is a Used Mast Climber Right for You? By Kelly Moore Ask the experts about mast climbers, and they’ll tell you to think of the equipment as you would an automobile. “Mast climbers are like cars,” says Victor Marcantoni, owner of Northeast Mast Climbers (NEMC) and…
    Tags: equipment, mast, contractors
  • 52
    March 2011 Mast Climbers Purchasing Used Mast Climbers Photo courtesy of Hydro Mobile By Thierry Lachapelle The current state of the construction market presents all sorts of challenges for contractors. By the same token, it also offers tremendous opportunities for those who can afford it. For instance, the used construction…
    Tags: equipment, market, mast, contractors
  • 45
    August 2011 Rentals The Case for Renting Equipment Courtesy of Hydro Mobile By Wayne Walley In today’s challenging economy, the reasons for contractors and construction companies to rent equipment versus purchasing are magnified. “What rental offers contractors and construction companies is a cost-effective alternative to owning equipment, because equipment becomes…
    Tags: equipment
  • 45
    June 2013 Rentals Realizing the Benefits of Equipment Rental By Tom Hubbell Rental: the diesel-powered Brokk 400 from Brokk AB delivers durability in application where electricity is difficult to access. The system allows the operator to control the machine with quick, precise movements. www.brokk.com Equipment rental revenues continued to outpace…
    Tags: equipment
  • 44
    August 2011 Mast Climbers A Closer Look at Mast Climbing Work Platforms Mast climbing work platforms (MCWP) have a history built from a combination of not only knowledge, but also creativity, passion, mastery and proficiency. Combined, these qualities resulted in a product built of excellence and distinguished by power, the…
    Tags: mast, equipment, contractors, work

MASONRY MAGAZINE VIDEO NEWS

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Bill Dentinger 2015 Inductee MCAA Hall of Fame

Bill Dentinger 2015 Inductee MCAA Hall of Fame

John Smith, Jr.

John Smith, Jr. receives the 2015 MCAA C. DeWitt Brown Leadman Award

2015 MCAA Fastest Trowel On The Block Winner

2015 MCAA Fastest Trowel On The Block Winner

Daniel Furr 1st Place Winner

Daniel Furr 1st Place Winner (First Year), Masonry Skills Challenge

Synpro Products

Masonry Magazine Video News Interview: Michael Goyne

Hydro Mobile Inc

Interview with Kevin O'Shea of Hydro Mobile, Inc.

Interview with Mark Kemp – Chairman, MCAA

Interview with Masonry Contractors Association of America Chairman, Mark Kemp

Mortar Net Solutions

Interview with Steve Fechino from Mortar Net Solutions

Pullman Ermator

Interview with Lyndon Kelsey of Pullman Ermator

Keene Building Products

Interview with Jim O'Neill of Keene Building Products