Products
Maxi-Heat Portable Heater PDF Print

Allmand Bros. Inc.

Holdrege, Neb.

Information about the Masonry Industry

Allmand Bros. Inc. has upgraded its Maxi-Heat portable heater with higher static pressure and longer ducting. Incorporating a new fan-motor combination and increasing the static pressure from .5 wg to 1.5 wg, the upgraded Maxi-Heat is able to accommodate up to 110 feet of 16-inch ducting, rather than 40 feet with the previous model. The Maxi-Heat features twin heater units that produce a maximum of 1,010,000 Btu and may be operated independently, depending on heating requirements. A 191-gallon fuel tank provides more than 24 hours of operation without refueling.

www.allmand.com

Last Updated on Thursday, 03 September 2009 15:51
 
Ventilated Facade System PDF Print

GranitiFiandre

Chicago

Information about the Masonry Industry

GranitiFiandre's Ventilated Facade System offers environmental advantages and superior technical performance. The system involves the mechanical application of porcelain cladding to structures without the use of mortar, grout or caulk. Engineered to protect buildings against the combined action of rain and wind, while offering aesthetic characteristics, it inherently provides solutions for sustainable design. The Ventilated Façade System's benefits include energy savings, healthier interior environments, extended life of structures, and enhanced design. www.granitifiandre.com

Last Updated on Thursday, 03 September 2009 15:48
 
K 3000 Wet Electric Power Cutter PDF Print

Husqvarna Construction Products

Olathe, Kan.

Information about the Masonry Industry

Husqvarna Construction Products' K 3000 Wet is an electric power cutter that allows the user to cut indoors easily and cost-effectively, without dust. The K 3000 Wet is equipped with a newly developed wet-cutting kit that regulates the flow of water and concentrates the spray into a stream and then onto the blade. Specially designed nozzles are housed in specific positions along the blade guard to help keep water flow use to a minimum. It is important to keep water flow to a level that is sufficient to suppress the dust, but not cause excessive slurry. The K 3000 Wet is ideal for rapid and simple onsite cutting, and can make easy adjustments between a variety of building components, including pipes, reinforced steel and struts.

www.husqvarna.com

Last Updated on Thursday, 03 September 2009 15:45
 
LEVELROCK Floor Underlayment PDF Print

USG

Chicago

Information about the Masonry Industry

USG's LEVELROCK brand 4500 NXG floor underlayment is a high-performance, cementitious underlayment designed for interior use in a wide variety of commercial, institutional and rehab construction projects. It provides a smooth, hard surface that provides long life over concrete slabs, pre-stressed concrete and concrete planks at thicknesses from featheredge (with proper sand) to two inches. Suitable for use with a variety of floor coverings, the underlayment offers compressive strengths of up to 5,500 psi. Quick application and setting times, combined with high production rates, permit the resumption of trade traffic within hours of the underlayment pour.

www.usg.com

Last Updated on Thursday, 03 September 2009 15:45
 
Soapstone Bricks PDF Print

Vermont Marble, Granite, Slate & Soapstone Co.
Castleton, Vt.

Information about the Masonry Industry

Vermont Marble, Granite, Slate & Soapstone Co.'s Soapstone Brick line has been strongly accepted by architects, homeowners and masons who are especially conscious to energy efficiency. No other natural stone is denser or works like Soapstone does to retain and then radiate heat back into a room. Soapstone bricks are available in standard brick and firebrick sizes in both veneer and double thicknesses.

www.vermontmarbleandgranite.com

Last Updated on Thursday, 03 September 2009 15:39
 
Featured Product: 18V LXT Lithium-Ion Cordless Impact Driver PDF Print

Makita’s 18V LXT Lithium-Ion Cordless 3-Speed Brushless Motor Impact Driver, model BTD144, is a powerful and versatile impact driver with a variable, three-speed power selection switch.

Last Updated on Monday, 31 August 2009 05:00
Read more...
 
Featured Product: Parapet Wall Strengthening With Paratec PDF Print

CINTEC America Inc.’s Paratec is a versatile method of internal structural reinforcement tailored to meet the specific requirements of masonry parapet and retaining walls.

Last Updated on Monday, 31 August 2009 05:00
Read more...
 
Featured Product: PosiGrip Dipped Gloves PDF Print

West Chester Holdings expands the PosiGrip line with dipped gloves for industrial and commercial applications.

Last Updated on Monday, 31 August 2009 05:00
Read more...
 
Featured Product: EZ Grout Hog Crusher Job Site Material Recycler PDF Print

The new EZ Grout Hog Crusher Job Site Material Recycler is easily attached to a skid steer loader or forklift.

Last Updated on Monday, 31 August 2009 05:00
Read more...
 
Featured Product: QuestMX Estimating Software PDF Print

masonry productsMaxwell Systems Inc. has released QuestMX, a version of Quest estimating software with a new platform and functionality

Last Updated on Monday, 31 August 2009 05:00
Read more...
 
Low-Profile Side Boxes PDF Print

Low-Profile Side Boxes

Crystal Lake, Ill.

Information about the Masonry Industry

WEATHER GUARD's aluminum Low-Profile side boxes combine massive storage space with maximum rear-window visibility. The low-profile design of the side boxes sits just above the bedrail to keep rear sightlines intact, but the extra-wide design allows for the utmost in storage space. The boxes come with an Extreme Protection Lock, protecting each box against break-ins. An automotive-style latch provides smooth "one-touch" opening. The side boxes match profiles of full- and compact-sized aluminum Low-Profile saddle boxes and are quick and easy to install. weatherguard.com

Last Updated on Thursday, 13 August 2009 19:39
 
High-Speed, Corded, Auto-Feed Screwdriver PDF Print

High-Speed, Corded, Auto-Feed Screwdriver

Cincinnati

Information about the Masonry Industry

TyRex LLC's TY5100 auto-feed screwdriver has speeds of up to 5,000 RPM for increased productivity in commercial construction applications. Featuring a fully integrated design, the TY5100 offers better balance and smooth operation, for less user fatigue than traditional attachment-type tools. A patented Corner-Fit feed system allows for placement of screws in corners and around obstructions, while a patented clutch disengages when the screw is sufficiently set, eliminating stripped-out heads and prolonging bit life. The screwdriver is ideal for commercial construction projects like installation of exterior gypsum sheathing, interior drywall, and metal stud and truss framing. tyrextool.com

Last Updated on Thursday, 13 August 2009 19:38
 
<< Start < Prev 21 22 23 24 25 26 27 28 29 30 Next > End >>

Page 25 of 30