The Official Publication
of the Mason Contractors
Association of America

cover

Current Issue:
April 2014

Banner
Products
BLOK-FLASH Flashing Pans PDF Print

BLOK-FLASH Flashing Pans

Gary, Ind.

Information about the Masonry Industry

Mortar Net's one-piece BLOK-FLASH installs swiftly atop foundation or first course, and fits all exterior block sizes. It saves labor and materials versus customary options; holds superior bond; eliminates need for multiple sizes of architectural CMU; and is useful wherever flashing is specified. A built-in "bridge" intercepts moisture falling between pans, and a sharper slope creates faster outflow. The built-in Weep Spout expels moisture away from the foundation. Made of tough, lightweight, high-density polyethylene, BLOK-FLASH's polyester-mesh Drainage Mattes insert easily into the cores of the next course above pans to protect weep from mortar/grout droppings.

mortarnet.com

Last Updated on Thursday, 13 August 2009 14:32
 
Cordless Combo Kit PDF Print

Cordless Combo Kit

La Mirada, Calif.

Information about the Masonry Industry

Makita U.S.A. Inc.'s 10.8V Lithium-Ion Compact 3-Piece Cordless Combo Kit features a 10.8-volt flashlight, the 10.8-volt Compact Lithium-Ion Driver-Drill, and the 10.8-volt Compact Lithium-Ion Impact Driver. The kit also includes an ENERGY STAR-rated battery charger, two Lithium-Ion batteries, and a metallic case. The new compact tools are powered by a 10.8-volt Lithium-Ion battery, combining pro power and pro speed with an ultra-compact design. The Compact Driver Drill and Compact Impact Driver are the latest additions to Makita's growing line of cordless tools powered by Makita's Lithium-Ion battery technology, delivering more power, less weight and better engineering.

makitatools.com

Last Updated on Thursday, 13 August 2009 14:30
 
Fast Cure Adhesive Anchor System PDF Print

Fast Cure Adhesive Anchor System

Tulsa, Okla.

Information about the Masonry Industry

The Hilti HIT-HY 150 MAX Fast Cure Adhesive Anchor System is the first fast-cure adhesive anchor to receive an ICC-ES Report compliant with Acceptance Criteria AC308, offering designers strength design solutions for anchors and rebar. The fast-cure time and easy installation of the HIT-HY 150 MAX greatly increase productivity for anchor and rebar applications in un-cracked concrete, since anchors are ready for inspection and testing in as little as 30 minutes at 68°F. The HIT-HY 150 MAX also provides reliable fastening where in-service base material temperatures reach 248°F. The system comes in 11.1-, 16.9- or 47.3-fluid-ounce tubes.

us.hilti.com

Last Updated on Thursday, 13 August 2009 14:27
 
Featured Product: Vacuum-Hoist Lifter PDF Print

New ProductsThe Anver VB is a fully integrated vacuum-hoist lifter that can be equipped with custom pad attachments to handle three cement blocks at once, or various types of patio blocks and pavers.

Last Updated on Friday, 31 July 2009 11:52
Read more...
 
Featured Product: Low-cost Block Grinder PDF Print

new productConcut Inc.’s CB-1500E block grinder provides big machine quality and safety at the fraction of the cost of other alternatives.

Last Updated on Friday, 31 July 2009 11:56
Read more...
 
Featured Product: Foundation Software Green Technology PDF Print

Foundation Software has launched an eco-friendly green technology.

Last Updated on Friday, 31 July 2009 11:57
Read more...
 
Featured Product: Brush and Scraper Combo PDF Print

Hyde Tools’ MAXXGRIP PRO scraper blade is set on the tapered nose of two conveniently sized industrial quality brushes: a long-handle, large brush design for large area prepping with a tapered nose...

Last Updated on Friday, 31 July 2009 11:58
Read more...
 
Featured Product: Tuff Tubby PDF Print

Muskingum Equipment Outfitters’ mortar/concrete tub, the Tuff Tubby, holds 10 cubic feet and is made of a durable, lightweight virgin polyetholene.

Last Updated on Friday, 31 July 2009 12:00
Read more...
 
Imperial Systems, Inc., Diverter Valves PDF Print


Imperial Systems, Inc. Diverter Valves

This heavy-duty diverter valve is an effective method for directing flow from a single source to multiple destinations. Diverter Valves are used in a variety of applications: recycling, seed, grain, woodworking, steel, mining, aggregate, biofuels, food processing, pet food, ethanol, agricultural, chemical processing, paper scrap and fiberglass.

Standard features include 10 ga construction, three types of seals (rubber on metal, urethane on metal and metal on metal), locking quadrant, heavy-duty flange bearings, bolt on completely removable top and side access doors, totally smooth interior with no rough edges. Available in manual, electric or pneumatically operated, stainless steel construction, AR body and blade.

For more information, please visit www.isystemsweb.com, or speak with an experienced sales person at 800-918-3013.

Last Updated on Thursday, 30 July 2009 08:27
 
Cold Weather Mortar and Grout Mixing Solution PDF Print

Mason contractors are very aware of the added expense and the never ending battle of working in cold temperatures while constructing masonry projects. Throughout the history of masonry construction, one of the single largest costs and inefficiencies of working in the winter or any cold weather condition is generating a steady supply of warm water for mixing mortar and grout. The reality is that heating sand and water by way of propane gas and culvert pipe or direct flame on a barrel is a waste of money and time, not to mention it introduces safety concerns. Considering all of the recent innovations impacting masonry products, practices and equipment, there is definitely a need for a system that eliminates this job site challenge, especially a solution that increases the efficiency and productivity of a mason crew.

4U Manufacturing, a Wyoming based company, researched this cold weather predicament and developed the solution— “The Water Hopper”. The Water Hopper is a portable automatic water system that will place a pre-determined or variable amount of water into one or more mixers simultaneously. Operating with an innovative and energy efficient technology, the Water Hopper is a labor-saving device that will heat and dispense water on the jobsite. The unit ensures that the preferred amount of water at the optimal temperature to meet code requirements is introduced for every batch.

Depending on the contractor’s needs and job site space, the unit is available in the larger capacity “Extreme Water Hopper” and the smaller “Job Box Model”. The Extreme model is an 8ft. x 10 ft. standalone insulated unit that optimizes fuel efficiency, provides protection from the elements, and is easily transported on site or from job to job. It has two metered storage tanks and can dispense from both sides of the shell, working simultaneously to fill two mixing stations, one on each side. Also available is a scaled down version called the Job Box Model which is a smaller, more portable unit that is placed next to the mixer. With the flip of a switch, the Job Box produces hot water instantly.

Regardless of whether a contractor uses a silo system or small bags, mixing onsite has never been as consistent and efficient as it is with the Extreme Water Hopper. The unit ensures that the preferred amount of water at the optimal temperature to meet code requirements is introduced to every batch. The unit runs off of AC or DC power while using either propane or natural gas to generate heat and ultimately supplies mixing water with temperatures ranging from 98°F to 140°F. This allows the laborers to safely control the water heating process and results in the desired temperature of mortar and grout as stated in Building Code Requirements for Masonry Structures (ACI 530/ASCE 5/TMS 402). With the simple pull of a lever, a predetermined amount of heated water is dispensed directly into the mixer.

With an output rate of up to 40 gallons every five minutes, the Extreme Water Hopper can provide all the hot water needed from a small project to a very large project. Mason contractors revel at its ability to instantly charge a 20 cubic foot mixer with enough heated water for a full batch. Furthermore, while one batch of mortar or grout is mixing, warm water is automatically replenishing the Water Hopper’s metered tank providing continuous material batch cycle times that can be set between three to six minutes. When utilizing the Water Hopper, batches of mortar and grout will always be the temperature desired by the contractor. That said, job site inspectors can relax knowing the temperature of the product going into the wall is always within tolerance for optimal performance.

As a problem solver with an extensive background in masonry equipment, the originator of the Water Hopper, Mike Capps of 4U Manufacturing engineered the system while focusing on contractor benefits. To find the best solution Capps spent over three years in research and development, talking with numerous mason contractors and visiting job sites to witness the different approaches used by mason tenders to heat water. What he identified were significant inefficiencies which hindered production and increased costs. From the start it was clear the Water Hopper system was needed to help contractors reduce those costs and increase production.

In cold weather climates mason tenders or laborers are typically required to be on site early, sometimes up to an hour ahead of the crew to heat the water and prepare the first batch of mortar for the masons. The Extreme Water Hopper enables the mason tender to charge the first batch of mortar in the morning within five minutes of punching in and is ready to dispense heated water into the mixer for the second batch before the first mortar tub is loaded.  The tender then needs only the last five minutes of the day to prepare for the following day. This equals a minimum labor savings of 30 minutes every day or roughly 10 hours every standard work week.

Another savings the Water Hopper provides mason contractors with is lower fuel cost for heating water. During his field research Capps observed a project where the laborer had two handheld torches blowing flames directly on three 55 gallon water barrels to keep the water hot. It was estimated that the contractor was using nearly 100 pounds of propane gas every day. In comparison, the same amount of propane would last approximately two weeks to heat that same amount of water using the Extreme Water Hopper. The LP Gas or Natural Gas is only used when the demand for hot water is activated by the float; this eliminates wasted energy. When a contractor uses traditional torches and water barrels to heat water, it’s not uncommon for 80% of the fuel to be wasted, not so with the Water Hopper. Additionally, there’s a cost to chase down and replace the tanks daily, not to mention the wasted labor while waiting for the water to be hot enough to meet code.  Capps adds, “The Water Hopper requires very little maintenance and fuel compared to traditional heating methods and when contractors couple this savings with the profitability realized from increased daily production of their laborers and masons, the net gain can easily double if not triple”.

With increased safety requirements prohibiting open flames in many work areas, contractors utilizing the Water Hopper are benefiting because of the unique design with no exposed flame nor electrical elements in the water. The Water Hopper provides a quick, safe, energy efficient, professional tool for any mason contractor and gets two thumbs up from inspectors, general contractors, safety personnel, and project management.

The Water Hopper is patent pending and proudly manufactured in the USA by 4U Manufacturing LLC. It is available in the Extreme model or The Job Box model. With either option, The Water Hopper is an energy efficient, production boosting, labor savings piece of equipment, designed to maximize contractor profits and keep the jobsite safe.

For more information call 888-754-7909 or see our website at www.4Umfg.com.
Last Updated on Monday, 20 September 2010 13:33
 
Mahogany I-Beam Levels PDF Print

Sands Level & Tool Co.® now offers Professional Top Reading Mahogany I-Beam Levels. These levels are made from the finest selection of mahogany wood with a heavy-duty, aluminum I-beam frame. Large, clear vials for easy visibility and an adjustable top vial for accuracy. These levels also have shock absorbent end caps and protective glass lenses for durability. They are available in 24 and 48 inches. For more information, visit www.KraftTool.com, or call 800-422-2448.

 

 

Last Updated on Friday, 17 July 2009 11:55
 
Featured Product: Wire Brush and Scraper Combo PDF Print

Scraping paint and pulling up flooring is tough work, and these dual-action scraper/brushes from Hyde will save time and effort.

Last Updated on Tuesday, 30 June 2009 13:51
Read more...
 
<< Start < Prev 21 22 23 24 25 26 27 28 Next > End >>

Page 24 of 28