RSS
TwitterFacebookGoogle+YouTubeLinkedIn

New Holland Zero-Turn-Radius Mowers

Facebooktwittergoogle_plusredditpinterestlinkedinmail

New Holland has introduced a new series of zero-turn-radius mowers to its commercial mower line. The new G5000 Series commercial zero-turn-radius mowers have a number of industry-leading features that provide smooth, fast mowing.

The mower deck is mounted to the front axle, rather than the frame, allowing the deck to float over changes in ground contour for a clean cut without scalping. With a pivoting front axle that allows 5.5 inches of travel on each side, the G5000 Series provides a smooth cut on uneven terrain.

A massive 149-square-inch discharge opening more than doubles the industry standard to allow grass clippings to spread evenly in an eight-foot pattern without bunching or clumping. Each blade overlaps 1½ inches to prevent streaking. The deep-tunnel deck design eliminates deck packing and directs clippings away from the cutting edge enabling a high volume of clippings to be discharged. This design allows for an excellent cut even in tall grass.

G5000 mowers are built for durability with a high-strength channel frame and seven-gauge mower deck. Powered by efficient Kawasaki air-cooled gas engines, the G5030 is a 27 hp model with a 54-inch or 60-inch mower deck. The G5035 is a 31 hp model with a 66-inch mower deck. Both have twin six-gallon fuel tanks for all- day mowing.

www.newholland.com/na

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...