RSS
TwitterFacebookGoogle+YouTubeLinkedIn

NASCAR Driver Straps in to Raise Fall Safety Awareness

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Greg Biffle, NASCAR Sprint Cup Series driver, joins more than 1 million workers this week taking part in the National Fall Safety Stand-Down to emphasize fall prevention and raise awareness about fatal falls in the construction industry. This special event will be hosted at the site of the DAYTONA Rising project, a large-scale renovation of the Daytona International Speedway, on June 4, starting at 12:30 p.m. EDT.


President of Daytona International Speedway Joie Chitwood III; representatives from the design and building company responsible for the construction project, Barton Malow; and Deputy Assistant Secretary of Labor for Occupational Safety and Health Jordan Barab will all be on hand to address the build team at the site on the importance of fall safety. Additionally, Biffle will be strapping-in to a fall arrest system to demonstrate proper fall prevention equipment and how it saves lives at this site and across the country.


Falls are the leading cause of death in construction, with nearly 300 workers losing their lives in 2012 to preventable falls. Daytona International Speedway and NASCAR join more than 25,000 businesses participating in this unprecedented effort to protect workers. The Stand-Down will run through Friday, June 6, and it is a part of the Occupational Safety and Health Administration’s Fall Prevention Campaign, launched two years ago.


WHO:

Greg Biffle, NASCAR Sprint Cup Series Driver

Jordan Barab, Deputy Assistant Secretary of Labor for OSHA

Joie Chitwood III, President of Daytona International Speedway

Len Moser, Vice President of Barton Malow


WHAT:

Safety Stand-Down at DAYTONA Rising


WHERE:

Daytona International Speedway

Turn 1 Plaza

1801 W. International Speedway Blvd.

Daytona Beach, FL 32114


WHEN:

Wednesday, June 4

12:30 p.m. EDT

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...