RSS
TwitterFacebookGoogle+YouTubeLinkedIn

Mortairvent Two-ply System

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Advanced Building Products

Springvale, Maine

Information about the Masonry Industry

Advanced Building Products has responded to the to the increased use of manufactured stone and masonry veneers with the introduction of Mortairvent. Mortairvent is a two-ply mortar deflection and ventilation system that has been specifically designed for use with manufactured stone, stucco, EIFS and brick. By installing the Mortairvent two-ply system, a ventilation cavity is created between the vapor barrier and exterior wall. The blue polymer core mesh creates the airspace, while the filter fabric blocks mortar droppings from seeping into this newly formed cavity, still allowing moisture to pass through. The combination of drainage and ventilation greatly reduces the threat of toxic mold.

www.advancedflashing.com

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...