RSS
TwitterFacebookGoogle+YouTubeLinkedIn

Modular Stages on the Rise

facebooktwittergoogle_plusredditpinterestlinkedinmail

Scaffolding

A construction project by Lupini Construction
A construction project by Lupini Construction

There are countless movies, television commercials and shows in which the characters are in sticky situations, and they find the best way to get out of a difficult situation is to climb aboard a modular stage that happens to be located outside the window of a building. Modular stages allow people to get out of difficult situations, but these stages aren’t just for the benefit of Hollywood actors to make an impressive action sequence.

Construction companies are finding that they provide a great resource and solution to many in masonry and restoration needs. Modular stages are being utilized more over the traditional straight stages for efficiency and safety on the workplace. Traditional straight stages are ladders connected by planks, which provide a workspace. Modular stages are lending more advantages and safety features on the worksite.

Within recent years, scaffolding companies have a noticed an increase in modular use. There has been an increase within the last five years in instances of construction companies renting and purchasing modular staging for the purposes of masonry and restoration work. Construction companies doing masonry and restoration work are turning away from traditional straight stages for many reasons, and are realizing the advantages of modular staging. Not only do the modular stages allow for access at great heights, but also they provide numerous other functions.

A construction project by Lupini Construction
A construction project by Lupini Construction

One of the noteworthy advantages of modular staging is the ability to create custom stages to meet the specific needs of a job. Modular stages can be built to integrate and work with the different angles and corners of buildings, to allow easier and overall safer access to workers.

“Hi-Lo modular units lower project costs by their versatility/ease to be able to change different configurations to meet the access requirements a building creates on a project,” says Scott Lupini, VP of Lupini Construction.

The ability of modular stages to meet the needs for an individual job proves to be extremely valuable. Adaptability of modular staging allows for closer access to work surfaces, as opposed to a straight that might not exactly fit the job. This could cause workers to reach farther or work at drastic angles that might further endanger their safety. These unsafe practices can put unnecessary stress on motors and/or outriggers.

John Montecalvo of Caretti Restoration and Preservation Services shared an account of a job his company did at a hydro electrical plant in York Have, Pa. “For one drop we could use, say, a 20-foot rig, and for the next we needed a 30-foot rig,” Montecalvo says. “The reason the HI-LO system worked so well for us was that we could break it down and make it bigger or smaller as was needed. Also, the walkway that we had to work off of was only four feet wide, so there was no way to slide one rig past another. We had to make do with what we had.”

Another important safety attribute of modular stages is that they provide great strength and load capacity. The stages can hold heavier loads than the traditional straight stages. Depending on the various stage design/configuration and motor capacity, modular stages can have up to a 2,000-pound capacity, versus 750-pound capacities for straight stages. Having the ability to hold heavier loads eliminates the safety hazards and safety violations often associated with over-loading.

The access, availability, direct access to materials and supplies, and workers on a unit can increase work productivity and cut down on job time duration. But the most important feature is the general overall safety, provided from not only the modular unit itself, but also the fall protection equipment for workers.

When one measures the importance of worksite safety, options for customization of modular units for specific worksite needs, and overall efficiency, it is evident why modular stages are on the rise.


Article courtesy of HI-LO Climbers, Cincinnati, Ohio. For more information, visit www.hiloclimbers.com.

Return to Table of Contents

Related Posts

  • 37
    Table of Contents December 2012 Volume 51, Number 12 FEATURES Fireplaces and Chimneys The masonry heater revealed: A Q&A with the president of the Masonry Heater Association of North America Fireplaces and Chimneys How refractory mortar for masonry fireplace and chimney construction can be a wise choice Scaffolding A look at why modular stages are…
    Tags: construction, modular, stages

MASONRY MAGAZINE VIDEO NEWS

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Bill Dentinger 2015 Inductee MCAA Hall of Fame

Bill Dentinger 2015 Inductee MCAA Hall of Fame

John Smith, Jr.

John Smith, Jr. receives the 2015 MCAA C. DeWitt Brown Leadman Award

2015 MCAA Fastest Trowel On The Block Winner

2015 MCAA Fastest Trowel On The Block Winner

Daniel Furr 1st Place Winner

Daniel Furr 1st Place Winner (First Year), Masonry Skills Challenge

Synpro Products

Masonry Magazine Video News Interview: Michael Goyne

Hydro Mobile Inc

Interview with Kevin O'Shea of Hydro Mobile, Inc.

Interview with Mark Kemp – Chairman, MCAA

Interview with Masonry Contractors Association of America Chairman, Mark Kemp

Mortar Net Solutions

Interview with Steve Fechino from Mortar Net Solutions

Pullman Ermator

Interview with Lyndon Kelsey of Pullman Ermator

Keene Building Products

Interview with Jim O'Neill of Keene Building Products