Masonry Repair and Reinforcement Anchor System


Masonry Repair and Reinforcement Anchor System

Masonry Repair and Reinforcement Anchor SystemCINTEC Worldwide

CINTEC Reinforcing Anchor System is a micro cement anchoring and reinforcing technique to repair and renovation existing buildings. The process begins with an inspection of the structure by a qualified CINTEC engineer. The best reinforcement pattern is then determined. The system is inserted into the structure in need of reinforcement. A specially developed, non-polymer, cement-like grout is injected into the sleeve under low pressure. Then, the grout fuses with the mesh, expands and shapes itself around the steel to fit the space.


S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit:

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...