RSS
TwitterFacebookGoogle+YouTubeLinkedIn

Masonry Cavity Drainage Device

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Masonry Cavity Drainage Device

Masonry Cavity Drainage DeviceKeene Building Products
Mayfield Heights, Ohio

Keene Building Products is manufacturing a masonry cavity drainage device, the KeeneStone Cut, a three-dimensional, geometric patterned core with a high loft fabric laminated to one side. The highly compressible fabric is able to slightly compress to fill the cavity, allowing it to change thickness up to one-half inch to prevent any mortar blockage. This product is designed to catch and hold mortar dropping, while allowing moisture to pass through, and keep the weep holes open. The KeeneStone Cut is placed in a strip horizontally in a masonry cavity wall requiring no mechanical fasteners, and is manufactured to be 10 inches in height within the cavity.

www.keenebuilding.com

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...