RSS
TwitterFacebookGoogle+YouTubeLinkedIn

March 2014: Chairman’s Message

Facebooktwittergoogle_plusredditpinterestlinkedinmail

March 2014

Chairman’s Message

It’s All About Helping Each Other

Wow, what a great convention! I am on the plane, heading back to Milwaukee and thinking about all the things MCAA has going for its members.

There were lots of great seminars like Foreman Development, Wall Bracing, Scheduling and MQI, to name a few. This is a good way for contractors who need to fulfill certification requirements to get it done and talk with other contractors. Contractors Round Table discussions were packed with contractors eager to share or hear how their peers handle different problems as well.

Masonry Foundation

This is what MCAA and life are all about: helping each other. MCAA is breaking new grounds with the newly created Masonry Foundation. This foundation will serve as the key to funding the many challenges that face our industry now and in the future. It is our goal to raise $2.5 million over the next three years.

Right now, BIM-M is extremely important for the masonry industry. If we do not get this done, and done right, our competitors will put an end to masonry as we know it today. MCAA has pledged $400,000 over the next four years. We also need money to finance workforce development and education, to ensure we have the best-skilled workforce for our industry. Tom Daniel will serve as chairman, with Mackie Bounds as campaign chairman.

Brazos Masonry (Mackie and Pete) have pledged $100,000 over five years. Other associations have stepped up: Milwaukee Mason Contractors – $50,000 over five years; St. Louis Masonry Industry – $75,000 over five years; Arizona Mason Contractors – $25,000 over five years; Mason Contractors Association of California – $5,000 over five years; and Texas Masonry Council – $5,000 for 2014.

We met our pledge for 2013, paying off our first $100,000, so we should all be proud. Don’t sit back and let others do all the heavy lifting. Feel free to contact MCAA or visit the MCAA website to make an investment in your future. Your donation is 100 percent tax deductible. Just as we should leave this world a little better, so we should with our industry.

Mark Kemp breaking blocks
Just as MCAA is breaking new grounds with the newly created Masonry Foundation, Mark Kemp – a 4th-degree black belt in Tae Kwon Do – is shown breaking concrete blocks.

Masonry Madness

Just when you think this event couldn’t get better, it does. Spec Mix does an unbelievable job running this event. The Skills Challenge, Fastest Trowel on the Block, and BRICKLAYER 500 were amazing to watch. This was NCMA’s second year as a sponsor and we really had a great demonstration on the use of block. New this year was BAC, which was a sponsor for the Skills Challenge. The BAC demonstrated great uses of different materials. We thank both NCMA and BAC, and look forward to working with them in the next year.

MCAA also is proud to announce our new, extended contract with The World of Concrete and World of Masonry through 2017. The convention has served as a platform to bring the masonry industry together. We can all work together to solve problems in our industry.

The MCAA Regional Program was announced and will happen across the country at various times during the year. The program will consist of Contractor Roundtables, educational classes and new product demonstrations. It will run a couple of days and will enable MCAA to reach out to members on a more personal nature. We also will reach out to nonmembers, showing them what MCAA is all about and how we can make their companies even stronger.

In closing, something we say in the martial arts is “PIL SUNG,” which means “certain victory” or “we can do.” I totally believe we can, and so should you.

Return to Table of Contents

Related Posts

  • 75
    December 2015 Will You Accept the Call to Serve? By Melonie Leslie I can’t remember a time when I wasn’t a part of the masonry industry. I have participated and contributed at many levels for our local and national associations. But, I had never ventured to Washington, D.C., to try…
    Tags: industry, masonry, will
  • 75
    February 2016 Chairman’s Message Thanks for Letting Me Give Back Mark Kemp Chairman Mason Contractors Association of America Mark@superiormasonry.com It is hard to believe that my term as chairman of MCAA has come to an end, and now a new chairman with fresh ideas will step in and begin his…
    Tags: mcaa, chairman, will, masonry, industry, foundation
  • 72
    March 2016 Let’s Share Our Passion! Michael Sutter Chairman Mason Contractors Association of America mike.sutter@suttermasonry.com After just returning from Las Vegas and the World of Concrete/World of Masonry, I can tell you I am re-energized. How could I not be after all the productive meetings, social events, and of course…
    Tags: industry, masonry, years, chairman, mcaa, will, mason
  • 67
    January 2016 A Week of Masonry You Can’t Miss Mark Kemp Chairman Mason Contractors Association of America Mark@superiormasonry.com I hope all of you had a great holiday season and are excited and energized about 2016. I am sure that, in 2016, many positive things will happen within the MCAA. Let’s…
    Tags: masonry, will, mcaa, foundation, $, industry, year, convention, great, contractors
  • 61
    August 2013 MCAA Report MCAA Key Accomplishments 2012-2013 An overview of your membership dues at work By Jeff Buczkiewicz Membership dues paid to the Mason Contractors Association of America (MCAA) are the largest source of funding that we have. Its importance cannot be understated. It's a vital part of the…
    Tags: will, mcaa, contractors, masonry, industry

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...