Harnessing Power


Power Tools

Today’s power tools make it possible for you to harness all the power you need to get the job done, and then some.

With each passing year, power tools pack more of a punch, become lighter in weight and are safer to use – all great news for you, the end-user, on the jobsite. To give you an idea of the many types of tools and endless advances in features available to you and your crew, Masonry has created a power tool round-up showcasing the endless array of bells and whistles. This review will allow you a snapshot of what a few of our industry’s top manufacturers are offering in the way of power tools.

Bosch Power Tools and Accessories
Farmington Hills, Mich.

Bosch Power Tools and Accessories introduces three new, super powerful rotary hammers that maximize impact energy, minimize vibration levels, yet maintain manageable size and weight to provide the utmost comfort in extended chiseling and drilling. Bosch has incorporated its patented Active Vibration Control technology into the newest members of the Bulldog family, 1-1/8-inch SDS-Plus RH328VC, RH328VCQ and 1-1/4-inch SDS-plus RH432VCQ Rotary Hammers. This technology reduces vibration in both the hammer mechanism and the grip area to reduce overall vibration by as much as 50 percent. The RH432VCQ operates at 8.5 amps with 3.7-foot-pounds of impact energy, making it the fastest drilling SDS-plus hammer in its class.

EDCO – Equipment Development Company
Frederick, Md.

EDCO — Equipment Development Co. has teamed with Cardi to offer a new line of Core Drills. EDCO Core Drills are lightweight, simple to use and feature Cardi electronic technology. These features include Electronic Clutches, Mechanical Clutches and Soft-Start technology – benefits that protect motors from overload, protect users against jamming and ensure smooth drill bit impact. EDCO’s single- and three-speed drills operate wet or dry, and run on normal household outlets. Lightweight stands designed for steady drilling and increased depth also are available. EDCO’s Core Drills are ideal for all kinds of projects, including chimney and boiler installation, anchoring tasks and A/C piping.

Tulsa, Okla.

The Hilti TE 4-A18, when combined with Hilti’s proven CPC battery technology, drills more holes in concrete per charge than any other 18V cordless rotary hammer in its class. The TE 4-A18 is ideal for drilling anchor holes or through holes in concrete and masonry, with an optimum drilling diameter range of one-quarter to one-half inch. The Hilti CPC battery technology protects the battery, switch and motor for increased durability and longer battery life. This cordless rotary hammer comes standard with a high-efficiency motor for longer tool life and productivity, as well as a drop-resistant housing to achieve maximum protection of the tool’s vital components. It also is built with a keyless “click” chuck for fast and easy drill bit changes.

Husqvarna Construction Products
Olathe, Kan.

Husqvarna’s K1260 power cutter follows in the footsteps of the K760 and K970 power cutters. Its 7.8-hp engine produces more output, and the built-in automatic filter compensation unit, SmartCarb, helps maintain high power and lowers fuel consumption. The Active Air Filtration system is one of the market’s most efficient air filtration systems. It delivers operational times (dry cutting) of about one year without filter service required. The Poly V-belt provides better power transmission, less retensioning and increased product life. The DEX, dust-handling system, provides cleaner cutting with less water usage.

Metabo Corp.
West Chester, Pa.

Metabo Corp.’s WP780 4.5-inch angle grinder has a non-locking paddle switch and a “Deadman” function that increases user safety by turning the grinder off automatically when its trigger is released or the tool is dropped. Built to withstand rugged operating conditions, including edge grinding, deburring, weld grinding, metal removal and tile cutting, the WP780 features a robust, 7.2-A motor with 780 watts of power, 14 inch-pounds of torque and a no-load speed of 11,000 rpm. Weighing just 4.7 pounds, this lightweight grinder is ideal for overhead applications or ones that require the operator to reach. It includes a burst-proof wheel guard meeting the latest international standards.

Milwaukee Electric Tool Corp.
Milwaukee, Wis.

Milwaukee Electric Tool Corp. has launched 18 Small Angle Grinders in 2011, designed to deliver durability, power and ease-of-use. Each grinder will feature an advanced motor technology. Milwaukee’s Electronic Advantage includes Overload Protection to maximize motor life, an Electronic Clutch that extends tool life and helps prevent bind-up, Line Lock-Out that prevents automatic start-up after power loss, and Soft Start. Many models also include Constant Power Technology, enabling the grinder to maintain speed under load. An airflow system allows air to move rapidly through the tool, keeping the motor cool and delivering optimal performance. L-shaped vents protect the motor by blocking debris particles.

Carson, Calif.

Multiquip’s Four-Cycle Rammer is designed for high efficiency with lower exhaust emissions, less noise and better fuel economy than standard two-cycle rammers. There is no need for mixed fuel. The engine is lubricated through the crankcase instead of through the fuel, so no oil is burned in the cylinder, reducing carbon buildup and minimizing gumming problems. The Rammer has a long-lasting composite clutch; a built-in hourmeter/tachometer; throttle control; and a cyclonic air filtration system. The MTR40F has an ability to work in confined spaces and is lightweight and portable – only 101 pounds. Grease lubrication minimizes the body size. A four-stage air filtration traps more than 99 percent of engine-damaging airborne dirt and dust particles.

Virginia Beach, Va.

STIHL’s TS 410 A (EWC) and TS 420 A (EWC) STIHL Cutquik cut-off machines are complete with the electronic water control (EWC) feature. The newly added EWC features a mounted key pad that allows the operator to easily adjust the flow of water while cutting, and remembers the last setting used. When using this feature, the flow of water stops at idle speed and starts again automatically when the throttle is engaged. Key features include the X2 Air Filtration System; an anti-vibration system; an upright, large-capacity fuel tank; a top-handle, lightweight and compact design; and increased fuel efficiency and reduced emissions.

Related Posts

  • 33
    October 2013 Saws and Saw Blades The Cutting Edge:  Saws and Saw Blades Review It seems advancements in technology never stop in the world of masonry, and the saws and saw blades segment of our industry is a great example of this technological growth. From lighter weight, ergonomic saws, to…
    Tags: power, tool, motor, grinder, technology, rotary, system, fuel, lightweight
  • 32
    July 2008 Bricklayers' Tools An overview of materials, designs and specialty markets that are forging new tools for bricklayers By Brett Martin The latest and greatest tools for bricklayers provide more comfortable grips, increased performance and longer life spans. And, there's more good news: New bricklayer tools also offer better…
    Tags: tools, tool
  • 32
    Milwaukee Tool Milwaukee, Wis. Milwaukee Tool expands its industry leading M12 System with the introduction of a portable vacuum that delivers unmatched power for the removal of wood, metal and other common debris. The M12 Compact Vacuum (0850-20) utilizes a high-efficiency motor and REDLITHIUM battery technology to deliver up 29…
    Tags: tool, power, system, motor, technology
  • 32
    October 2008 Power Tools More power, accurate cutting and dust control raise the bar for new masonry power tools. By Brett Martin New tools for the masonry industry continue the trend of lighter, faster and more comfortable. But today's new tools also add the benefits of better pricing, increased production,…
    Tags: tools, power, tool
  • 30
    July 2009 Air Barriers Understanding Air and Vapor Barriers By Jennie Farnsworth With moisture-related problems in both new construction and older buildings equally prevalent in the news, there is no doubt that air and vapor barriers should be a well used and understood tool in a designer’s bag of tricks.…
    Tags: air, system


Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Bill Dentinger 2015 Inductee MCAA Hall of Fame

Bill Dentinger 2015 Inductee MCAA Hall of Fame

John Smith, Jr.

John Smith, Jr. receives the 2015 MCAA C. DeWitt Brown Leadman Award

2015 MCAA Fastest Trowel On The Block Winner

2015 MCAA Fastest Trowel On The Block Winner

Daniel Furr 1st Place Winner

Daniel Furr 1st Place Winner (First Year), Masonry Skills Challenge

Synpro Products

Masonry Magazine Video News Interview: Michael Goyne

Hydro Mobile Inc

Interview with Kevin O'Shea of Hydro Mobile, Inc.

Interview with Mark Kemp – Chairman, MCAA

Interview with Masonry Contractors Association of America Chairman, Mark Kemp

Mortar Net Solutions

Interview with Steve Fechino from Mortar Net Solutions

Pullman Ermator

Interview with Lyndon Kelsey of Pullman Ermator

Keene Building Products

Interview with Jim O'Neill of Keene Building Products