Fire Safety Through Brick


exceptional fire resistance and durability of brick and other masonry products

The brick: It wraps itself around your most prized possessions – unless, of course, you live in a house clad with lesser materials. And those prized possessions? You and your loved ones who dwell inside those four walls. It just makes sense to protect them with the exceptional fire resistance and durability of brick and other masonry products.

Today, most houses – and even multi-family apartments and condominiums – are built with wood framing. You may not
realize this, but wood burns. When the wood in your house begins to burn, that is called a “structure fire.”

From that moment, the size of the fire doubles every 60 seconds. A two-inch wood floor joist or wall stud will burn through in about three minutes. It takes only 20 minutes for a fire to consume the entire building. That leaves only minutes or, perhaps, just seconds for you and your family to escape.
Fires can start within the building from cooking appliances. Faulty wiring is another cause of fires, especially in older houses. But fires also can start outside the house from charcoal grills, grass fires, and heat from nearby house fires. It only makes sense to protect your house and family with a cladding that will not burn, and will protect it from outside fires for an hour or more. That cladding is fired clay brick.

Proven fire protection

Brick industry professionals have long recognized the exceptional fire resistance of genuine clay brick. So, in 2006, the Brick Industry Association decided to put its money where its mouth was. We built five wall panels with brick and other claddings and conducted ASTM E119 full-scale fire tests. Each panel was 10 feet square and made of two-by-four wood framing. Three of those panels were clad with brick. The thinnest brick cladding was only 1 ¾-inch thick. And, each of the brick-clad panels withstood a full hour of fire exposure, followed by the standard hose stream test to see if a fire hose would breach the wall. All three brick-clad panels passed the one-hour fire test.

Of the other two panels, one was clad with a popular fiber-cement siding. The other was clad with vinyl siding. Not surprisingly, the vinyl siding panel burned up in about 20 minutes, with flames coming through the wall. The fiber cement siding protected the wood framing a little longer, but the siding itself caught fire in just a few minutes, and the fire burned through the wall in less than an hour. The lesson here is fairly simple: Brick does not burn, and brick cladding will protect your house from wildfires for at least an hour.

exceptional fire resistance and durability of brick and other masonry products

Wildfire destruction

In only the last 10 years, there have been massive wildfires in California, Arizona, New Mexico, Colorado and Texas that destroyed thousands of homes. One fire in Bastrop, Texas, in 2010 destroyed more than 1,300 homes. But among those thousands were some houses clad with brick that survived, because the brick would not burn.

People love to get back to nature, and that includes building houses in more remote settings with trees and other natural cover. But, when people live in the woods, it only makes sense to provide protection from the greatest enemy of those woods – wildfires.

A choice and an opportunity

So why doesn’t everyone build houses with brick? That is a good question. Brick has far less maintenance than other claddings, which disintegrate in sunlight and must be painted regularly. Brick and quality mortar will last for hundreds of years without attention. Brick costs a little more, but it adds so much value to a home that it will sell quicker and for a higher price than lesser houses.

Brick also adds to property values of entire neighborhoods. That is why many cities are adopting masonry ordinances. Those that allow lesser claddings soon find that their tax revenues dwindle as property values fall, relative to other cities that require at least 75 percent of each house to be clad with brick or other masonry products.

Our country is slowly emerging from five years of the greatest recession since the Great Depression of the 1930s. As the economy continues to be rebuilt, people finally are beginning to build a significant number of new homes throughout the country. As members of the building industry, it makes a lot of sense to promote brick cladding on new houses and other structures. The superior fire protection, low maintenance, durability and quality of genuine fired clay brick should be insisted upon by homeowners and new home buyers.

Product Watch
exceptional fire resistance and durability of brick and other masonry productsCalStar has added several new shapes to its production capabilities, expanding the number of styles available across its lines of sustainably manufactured bricks, pavers and structural units. Many of the new products were developed in response to customer requests.

Like all CalStar masonry products, the new shapes are made with a process that incorporates up to 37 percent recycled content and eliminates the need for kiln-firing, typical of traditional clay brick, or the use of Portland cement, used to bind concrete masonry products.

As a result, each product requires up to 81 percent less energy to make, while emitting up to 84 percent less CO2. This dramatic reduction in environmental footprint comes with no sacrifice to aesthetics or performance, and the raw material and energy savings actually equate to more affordable per-unit costs, says CalStar.

The new shapes, which come in all of CalStar’s available colors, include:

  1. Engineer Brick: These 3 5/8- x 2 3/4- x 7 5/8-inch bricks install as quickly as a modular brick, but cover more square feet of wall with the same number of units, lowering installation costs.
  2. Monarch Brick: This 3 5/8- x 3 5/8- x 15 5/8-inch brick is popular in commercial construction.
  3. Full-Height Thru-Wall Units: In response to the success of CalStar’s original half-high 8- x 4- x 16-inch and 12- x 4- x 16-inch Thru-Wall units, the company now offers an 8- x 8- x 16-inch and a 12- x 8- x 16-inch Thru-Wall unit. Like the original Thru-Wall, these new units combine the structural properties of concrete block with the aesthetics of brick.
  4. 12×12 Pavers: Initially produced for the Toyota Center, home of the NBA’s Houston Rockets, the nominal 12-inch x 12-inch x 60-mm units module with and are the perfect complement to CalStar’s existing 4- x 8-inch

Holland pavers. The pavers feature a smooth finish with chamfered edges.

“As the demand for CalStar’s sustainable bricks continues to grow, so do requests for new shapes. We’ve been able to introduce these new shapes as projects and specifications have required them, and then add them permanently to our catalog,” says Michael Telischak, VP of manufacturing for CalStar. “Our flexible manufacturing capabilities allow architects to achieve desired aesthetics, while also contributing to a lower carbon footprint and a more affordable masonry budget.”

For more information, visit

John Swink, PE, LEED-AP is technical services engineer for Acme Brick Co., Fort Worth, Texas.

Return to Table of Contents

Related Posts

  • 50
    April 2009 Brick Thin Brick Is Thin Brick Your Friend or Foe? As a marketer of thin brick and thin brick wall systems for the last 20 years, I see first-hand how people many view thin brick as an asset to the masonry industry, and how many others see it as material that is “taking…
    Tags: brick
  • 44
    April 2009 Brick Hollow Brick: 101 How well do you understand hollow brick? Traditionally, the size and number of holes in a brick unit have varied, based on manufacturer capabilities, the type of clay being extruded, the type of firing process, and the intended use of the product. These various hole patterns were categorized into…
    Tags: brick
  • 42
    Six New Shapes for Sustainable Brick LineCalStar ProductsCaledonia, Wis. CalStar Products is expanding its brick offerings with six new sizes. The units incorporate 37 percent recycled content and eliminate the need for kiln-firing. The new sizes comprise the Ambassador brick: 2 1/4” high x 15 5/8” long – available smooth or as a split-face unit;…
    Tags: brick, calstar
  • 39
    February 2011 Brick Sustainability Moves Forward With Bricks Photo courtesy of National Building Museum While the construction industry hunts for the newest sustainable building materials, an ancient product offers substantial sustainability benefits. Bricks, the oldest building material in existence, can improve a building’s energy efficiency, reduce the environmental impact of building maintenance, and easily reach…
    Tags: brick, calstar
  • 38
    September 2013 Safety Faux Fire Walls Cause Real Tragedies Shown is fire wall construction compartmentation. Image courtesy of Pennsylvania Concrete Masonry Association By Mukaddes Darwish, Ph.D. Every year, thousands of Texas families are displaced by multifamily structure fires. The failure of many Texas cities to adopt zoning ordinances, development standards and building codes that require…
    Tags: fire


Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Bill Dentinger 2015 Inductee MCAA Hall of Fame

Bill Dentinger 2015 Inductee MCAA Hall of Fame

John Smith, Jr.

John Smith, Jr. receives the 2015 MCAA C. DeWitt Brown Leadman Award

2015 MCAA Fastest Trowel On The Block Winner

2015 MCAA Fastest Trowel On The Block Winner

Daniel Furr 1st Place Winner

Daniel Furr 1st Place Winner (First Year), Masonry Skills Challenge

Synpro Products

Masonry Magazine Video News Interview: Michael Goyne

Hydro Mobile Inc

Interview with Kevin O'Shea of Hydro Mobile, Inc.

Interview with Mark Kemp – Chairman, MCAA

Interview with Masonry Contractors Association of America Chairman, Mark Kemp

Mortar Net Solutions

Interview with Steve Fechino from Mortar Net Solutions

Pullman Ermator

Interview with Lyndon Kelsey of Pullman Ermator

Keene Building Products

Interview with Jim O'Neill of Keene Building Products