RSS
TwitterFacebookGoogle+YouTubeLinkedIn

February 2009: Mast Climbers

facebooktwittergoogle_plusredditpinterestlinkedinmail

February 2009

Mast Climbers

The Mast Climber Advantage

Information about the Masonry Industry

Photo courtesy of Hydro Mobile

How these money-making machines offer unrivaled benefits that increase profits

Mast climbers are becoming indispensible to the commercial masonry industry, says Michael Solomon, national sales manager for the Columbus, Ohio-based companies TNT Equipment Co. and Premier Scaffold Solutions (exclusive North America distributors of the new Pro-Series mast climber that’s manufactured by Atlanta-based Hydek).

“We’re getting to the point that, if you’re a commercial masonry contractor, you need a mast climber,” he says.

Solomon estimates that about 40 percent of masonry contractors working on commercial jobs use mast climbers.

Information about the Masonry Industry

Photo courtesy of EZ Scaffold

New mast climbers bring benefits
This month, World of Concrete is the site of the launch of the Pro-Series, a mast climber that offers a 20,000-pound capacity with a 13-horsepower electric start engine and a 35-foot freestanding height.

“These machines can have a single unit go as wide as 64 feet or, in a twin configuration, as wide as 148 feet, not to mention the ability in handling corner bridging and forward extensions of up to 20 feet in front of the deck,” Solomon says. “What’s new about our mast climber is we can do wider linear feet per a single unit. We also offer different configurations for bridging and going around corners.”

The Pro-Series reduces the number of pieces needed to make the scaffolding versatile.

“We have less pieces that create more solutions,” Solomon says. “A masonry contractor can buy fewer pieces, because the pieces have a higher utilization. The end-user doesn’t have to have a million pieces for bridging and corner configurations.”

Also new is the E-series from Hydro Mobile in Quebec, Canada. “The E-series is our electric model. It’s the first electric model for Hydro Mobile,” says Thierry LaChapelle, marketing director.

The E-series climbs up to 250 feet, has a 39-foot work platform, and offers a 5,800-pound weight capacity. It also features forward and back extensions, and swivel bridges for a wide range of configurations.

“E-Series is a light- and medium-duty mast climber which combines low ownership and rental costs with versatility,” LaChapelle says, adding that the mast climber works great for small-scale repair and restoration work.

Information about the Masonry Industry

Photo courtesy of EZ Scaffold

Safety first
Most manufacturers provide mast climber training programs. Hydro Mobile University offers three-day seminars on proper installation, operation and transportation of the company’s mast climbers.

“A mast climber is by far the safest scaffolding,” LaChapelle says. “Most accidents are caused by a lack of training.”

Contractors need to be trained to gain maximum productivity, he says. “You gain over 30 percent productivity [with mast climbers]. You don’t need to move planks, and you’re working at the ideal height.”

TNT Equipment and Premier Scaffold have a free training program that teaches how to set up and use mast climbers.

“Mast climbers have made this industry tremendously safe, if you follow the manufacturers’ standards,” Solomon says. “The mason can’t walk off the end of the scaffold. We have all of the guard rails built in for safety.”

The wide platforms hold a lot of weight, which lets masonry contractors set brick or block on the scaffold where laborers can easily reach it, he says. “The deck is 7 feet wide, which is a lot more space for holding material. There’s a lot of room for laborers to move around.”

Columbia, Tenn.-based EZ Scaffold has sliding gates, so no one has to stand next to an opening.

“If the scaffold is assembled correctly, they are enclosed platforms from the ground to the top of wall,” says Clint Bridges, EZ Scaffold VP. “There are no boards to jump or platforms to reconfigure. The top safety rail, mid-safety rail, and toe boards are all built in.”

Even though mast climbers are easy to set up and use, contractors need to follow through on training, he says. “If the scaffold is not ready when the mason needs it, profits are lost. If it is not set up and used properly, lives are lost.”

Information about the Masonry Industry

Photo courtesy of Hydro Mobile

Less labor, more money
Mast climbers require less labor to assemble and move, eliminating down time.

“The main reason contractors are moving toward mast climbers is they are money making machines,” Bridges says. “Mast climbers can be set up and moved twice as fast as crank up with half the labor.”

One or two people can set up a mast climber 72 feet long X 40 feet high, straight off the truck, in less than an hour and move it in less than 45 minutes, he says.

Labor on the scaffold is reduced by at least 30 percent, since there are no boards to raise or winches to crank, Bridges says. “All the laborer has to do is keep the mason stocked, and this is easy on a metal deck with no board lap. The labor feels safer and is more productive.”

LaChapelle agrees, noting that mast climbers can pay for themselves within 18 to 24 months because of reduced labor.

Information about the Masonry Industry

Photo courtesy of EZ Scaffold

“Instead of one laborer per mason, you can have two laborers per three masons,” he says.

Mast climbers let masons work between waist and chest level, where they can lay 25 percent more product because of better ergonomics. “They’re working at their ideal height and not stressing their bodies,” Solomon says, who points out that raising mast climbers requires less work than other scaffolding.

“With crank up scaffolding, you have to have someone crank it up every seven to 10 feet on a wall,” Solomon says. “With the Pro Series, one guy is able to lift 160 feet of scaffolding by himself.”

Two people can erect 100 feet of Pro-Series scaffold in just a couple of hours, he says. “Now you can save labor with set up, which gets your production up because you have the guys working on the wall right away.”


Related Posts

  • 74
    August 2014 Mast Climbers Is a Used Mast Climber Right for You? By Kelly Moore Ask the experts about mast climbers, and they’ll tell you to think of the equipment as you would an automobile. “Mast climbers are like cars,” says Victor Marcantoni, owner of Northeast Mast Climbers (NEMC) and…
    Tags: mast, climbers
  • 65
    August 2012 Mast Climbers Taking on Mast Climber Safety Responsibilities This structure was used to train many different groups, due to mast climbers being used for multiple trades. Training for masons, the window contractor, the inspectors, the steel contractors and the sheathing contractor were conducted here. By Michael Solomon Today,…
    Tags: mast, climber, climbers
  • 64
    January 2014 Mast Climbers New Initiatives in the Mast Climber Industry Shown is the P Series Single Mast Unit. Canadian mast climber manufacturer Hydro-Mobile is using the World of Concrete trade show as a springboard for new initiatives designed to raise performance levels in the industry. The company will create…
    Tags: mast, climber, climbers
  • 62
    January 2011 Mast Climbers Why Mast Climbers Make Sense Shown is the JP Cullen & Sons jobsite at Oshkosh University in Oshkosh, Wis. By Michael Solomon In 1996, I traveled regularly to Michigan, trying to sell a new product, mast climbers. The masons in Michigan were using tube-type scaffolding and…
    Tags: mast, climbers
  • 53
    Table of Contents August 2015 Volume 54, Number 8 FEATURES Workforce Development NCCER and MCAA address masonry’s immediate need to elevate its commitment to recruitment and training. Why Masonry? With a skilled labor shortage in the masonry industry, skilled masons are especially in demand. Mast Climbers Mast climber usage is…
    Tags: mast, solomon, climber, climbers, scaffold

MASONRY MAGAZINE VIDEO NEWS

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Zachary Zuldema 1st Place (2nd Year) Winner Interview at the World of Concrete

Bill Dentinger 2015 Inductee MCAA Hall of Fame

Bill Dentinger 2015 Inductee MCAA Hall of Fame

John Smith, Jr.

John Smith, Jr. receives the 2015 MCAA C. DeWitt Brown Leadman Award

2015 MCAA Fastest Trowel On The Block Winner

2015 MCAA Fastest Trowel On The Block Winner

Daniel Furr 1st Place Winner

Daniel Furr 1st Place Winner (First Year), Masonry Skills Challenge

Synpro Products

Masonry Magazine Video News Interview: Michael Goyne

Hydro Mobile Inc

Interview with Kevin O'Shea of Hydro Mobile, Inc.

Interview with Mark Kemp – Chairman, MCAA

Interview with Masonry Contractors Association of America Chairman, Mark Kemp

Mortar Net Solutions

Interview with Steve Fechino from Mortar Net Solutions

Pullman Ermator

Interview with Lyndon Kelsey of Pullman Ermator

Keene Building Products

Interview with Jim O'Neill of Keene Building Products