RSS
TwitterFacebookGoogle+YouTubeLinkedIn

Featured Product: Deep-Sensing Moisture Meter

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Deep-Sensing Moisture Meter

Deep-Sensing Moisture MeterGeneral Tools & Instruments
New York, N.Y.

General Tools & Instruments’ Pin/Pinless Deep Sensing Moisture Meter with Spherical Sensor and Remote Probe (MMD950) detects moisture/water damage under tiling and checks moisture in masonry. Depending on the area or surface to be measured, the instrument affords the flexibility to choose from one of two measurement modes. Pin mode uses replaceable pins at the end of a 46-inch cable; Pinless mode uses an integral spherical sensor. These different modes enable users to measure moisture in corners, hard-to-reach areas, narrow spaces and uneven surfaces. The spherical sensor measures the average moisture level up to a depth of 4 inches.

www.generaltools.com

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...