RSS
TwitterFacebookGoogle+YouTubeLinkedIn

Featured Product: Belt-Drive Cold Pressure Washer

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Belt-Drive Cold Pressure Washer

Somerset, Pa.

Steam Jenny has four new models of belt-drive cold pressure washers, which provide a longer pump life than direct-drive units. The extended service life is due to the pulley system, which turns the pump significantly slower than if the pump was coupled with the engine crankshaft. Additionally, the belt absorbs engine vibration and allows the pump to be located farther away from the engine heat. The pressure washers are powered by nine- or 13-horsepower Honda GX Series engines, and all models feature a triplex ceramic plunger pump for years of service with little maintenance. They are available with pressure ratings between 3,000 and 4,000 psi, and flow rates vary between 3 and 4 gpm. A customizable option allows customers to choose a unit with pressure and flow ratings based on their specific needs.

www.steamjenny.com

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...