RSS
TwitterFacebookGoogle+YouTubeLinkedIn

Fast Cure Adhesive Anchor System

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Fast Cure Adhesive Anchor System

Tulsa, Okla.

Information about the Masonry Industry

The Hilti HIT-HY 150 MAX Fast Cure Adhesive Anchor System is the first fast-cure adhesive anchor to receive an ICC-ES Report compliant with Acceptance Criteria AC308, offering designers strength design solutions for anchors and rebar. The fast-cure time and easy installation of the HIT-HY 150 MAX greatly increase productivity for anchor and rebar applications in un-cracked concrete, since anchors are ready for inspection and testing in as little as 30 minutes at 68°F. The HIT-HY 150 MAX also provides reliable fastening where in-service base material temperatures reach 248°F. The system comes in 11.1-, 16.9- or 47.3-fluid-ounce tubes.

us.hilti.com

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...