RSS
TwitterFacebookGoogle+YouTubeLinkedIn

Comparing Compressive Strength of Alkali-Activated Coal Fly Ash to Natural Pozzolans

Facebooktwittergoogle_plusredditpinterestlinkedinmail

Comparing Compressive Strength of Alkali-Activated Coal Fly Ash to Natural Pozzolans

ASTM International Committee C01 on Cement is developing a proposed standard that will be used to help create data for comparing the compressive strength of alkali activated fly ash and natural pozzolans.

ASTM WK42602, Test Method for Compressive Strength of Alkali Activated Coal Fly Ash and Raw or Calcined Natural Pozzolan Cement Mortars (Using 2-inch or [50 mm] Cube Specimens), is under the jurisdiction of Subcommittee C01.13 on Special Cements.

“Once approved, ASTM WK42602 may be applied to compare different lots or sources or to monitor changes in strength given by a single source of fly ash or natural pozzolan,” says Dr. Ivan Diaz-Loya, research engineer, CERATECH Inc., and a member of C01 and C09 on Concrete and Concrete Aggregates. Fly ash-based binders are used in a wide range of construction projects, including precast, roller-compacted and ready-mix concrete.

According to Diaz-Loya, primary users of ASTM WK42602 will be producers of construction materials, independent testing laboratories and academic research groups. “The proposed standard will help alkali activated materials to gain acceptance in the marketplace by making it easier to ensure that consumers are provided with a quality product,” says Diaz-Loya. “It will also help to validate and compare results between different research groups.”

Diaz-Loya says C01.13 hopes that the development of ASTM WK42602 will lead to further test methods, practices and specifications for the material covered. Interested parties involved in the research or production of alkali activated fly ash or natural pozzolan products are invited to join in the ongoing development of ASTM WK42602.

MASONRY MAGAZINE VIDEO NEWS

S26 HEPA Dust Extractor From Pullman Ermator

Ermator HEPA Dust Extractors are equipped with tested and certified HEPA filters that trap the smallest, most dangerous-to-breath dust particles and prevents them from being released in the air. A HEPA Dust Extractor not only exhausts perfectly clean air, it is far more efficient for the fast recovery of bulk dry dust, debris and other building materials found on every Construction, Abatement and Restoration job site.

Drilling and Chiseling Hammer Demonstration | CS Unitec

CS Unitec Drilling and Chiseling Hammer type 2 2414 0010 demonstration. For more information on the tools, drills and other products seen in this video, please visit: http://www.csunitec.com/hammer-drills/

PumpMaster | Masonry Grout Pump for Core Filling | Block Fill | Masonry Wall Grouting

The AIRPLACO PumpMaster PG-30 is shown on a jobsite in Nashville, TN with Masonry Contractor WASCO, Inc. ...