Home Page of Masonry Magazine

Advertise to mason contractors

Subscribe to Masonry Magazine
Sponsors of Masonry Magazine
Classified Advertising for Mason Contractors
Contact Masonry Magazine
Search Masonry Magazine
Order reprints of Masonry Magazine
News for masonry contractors
Claendar of masonry events
Links to masonry related sites
Web site of the Mason Contractors Association of America
Web site of the Mason Contractors Association of America

Measuring

Folding rulers have been around for a long time. It is said that a folding measuring device was even found in the ruins of ancient Pompeii. Until the invention of a retractable steel tape measure, folding rulers were the standard device used by all tradesmen. The steel tape was a great improvement for carpenters and other craftsmen who had to take long measurements. However, other trades have kept using folding rulers because of the benefits they get from this tool.

Since the introduction of Rhino Rulers, a waterproof folding ruler made of fiberglass, many masons are finding even more reasons to stay with this "old reliable." Folding rulers work for this trade because brick masons use their special scales designed for marking brick courses. These scales have equally marked graduations for each brick course and a brick mason uses them for laying out courses within a given overall dimension, such as equal coursing marks between a foundation and soffit, or to lay bricks along a window sill without having to make an unsightly cut. Brick spacing rules are also used when a mason lays a soldier course over an opening and wants to avoid having an unattractive looking cut within a detail area.

Yes, you can buy steel tape measures with brick courses printed on them, but most masons still prefer a folding ruler because it is stiffer than a steel tape. This is important when you are trying to mark courses along a vertical surface such as a door jamb or lead pole; it is very awkward to try holding a steel tape vertical and keep it still while you are trying to make several accurate marks without it moving like a ribbon in the wind.

Another advantage of a folding ruler in masonry is that masons can take an accurate measurement above their heads without climbing a ladder. For example, a mason usually hangs a string line for keeping an accurate corner plumb. If the mason unfolds his rule and bends the first limb to a 90-degree angle, he or she can reach above their head to accurately measure the distance of the string from the wall. This same trick can be used to measure dimensions of soffits or overhangs without climbing scaffolding or a ladder, as long as the area being measured is within a six-foot reach.

The biggest problem with wooden folding rulers is that they are really more suitable for working indoors. Folding rulers made of wood have the numbers and brick spacing graduations painted on; the paint on a folding ruler is subjected to water, mortar, sand and the overall abuse that masonry tools go through. Because of this, the paint peels off, along with the graduations the mason needs. Another thing that happens is that when they get wet, the wood expands within the brass hinge and when the ruler dries it can become too loose in the hinge and cause the ruler to become inaccurate. A wooden folding ruler that has expanded and contracted several times can be pulled out at both ends. At that point, who knows how accurate it is. Wooden rulers are also fragile and can break very easily when subjected to these harsh conditions.

At Rhino, we simply make the same exact tool, but out of fiberglass and with an improved, stainless steel hinge design that does not allow the limbs to "slip" within the hinges. Our graduations are engraved into the fiberglass, so there's no chance of them rubbing off like they do on a painted wood rule. Plus, they are completely waterproof — underwater archeologists use our rulers for taking measurements while deep-sea diving. Although masons may not go to those extremes, we're positive that the durable aspects of a folding ruler far out-weigh those of any other.







  •  
     

    www.masonrymagazine.com

    MASONRY
    ©2003 by the Mason Contractors Association of America
    All rights reserved
    33 South Roselle Road, Schaumburg, IL 60193
    Phone: 847-301-0001 or 800-536-2225 | Fax: 847-301-1110

    Web site by: Lionheart Publishing, Inc.
    506 Roswell Street, Suite 220, Marietta, GA 30060
    Phone: 770-431-0867 | Fax: 770-432-6969
    lpi@lionhrtpub.com
    www.lionhrtpub.com