Lidie's Specialty Tools
The SR Bucket Clamp is designed to hold a five-gallon bucket safely in place while mixing resistant materials with an electric drill, preventing the bucket from moving. With only 40-50 pounds of standing body weight on the foot lever applies approximately 240-250 pounds per square inch at the contact of the bucket, giving the worker full control of the bucket and reducing injury and wasted materials due to spills. The SR bucket clamp will save at least 20-30 minutes a day, meaning the SR bucket clamp will pay for itself in just one week, with nothing but profit after that. For more information, call (530) 722-5525, or visit www.srbucketclamp.com.
Lochotzki Masonry LLC
Using the patented BRICKCONSTRICTOR and a cut-off saw allows you to cut one to 12 brick at a time. Set the Quick Marking Guide to the size of cut you need and it will be ready for the next tong. Make your cuts 50 percent faster than using a table saw. It is safer, keeping fingers away from the saw blade, and the frame is a durable, welded construction. Easy to transport. For more information, call Lochotzki Masonry LLC at (888) 332-9215, or visit www.brickconstrictor.com.
Mi-T-M Corporation has introduced four new job site toolboxes, made of heavy-duty solid steel construction to keep your valuable tools and equipment secure from theft and shielded from the elements. The job site toolboxes feature: special tamper-proof armored locking system for protection against break-ins; reinforced support skids for increased protection and easy transporting; special locking lid support keeps the lid open to prevent accidental closings; heavy-duty solid steel construction with full-arc welded seams; special powder-coated finish for extreme durability; full-length concealed hinges are riveted for additional protection and strength; and pre-drilled skids for easy caster installation. For more information, call (800) 553-9053, or visit www.mitm.com.
North Safety Products
The North GC2000 goggle clip makes wearing goggles with a hard hat a snap! Just attach the three goggle clips onto the brim of a hard hat and the goggle clips hold the goggle headband securely in place. Designed primarily for North and Fibre-Metal brand hard hats, the clips will work on almost any traditional hardhat as well. North's GC2000 is made from a heavy duty, non-conductive plastic material suitable for the most demanding work environments. For more information, call (888) 422-3798, or visit www.northsafety.com.
Northern Tool + Equipment
The eight-inch Mason's Trowel Filer keeps trowel edges square and free from chips, dents and rough edges. It's perfect for brick and block masons, cement masons, sheet rockers, plasterers, stuccoers and tillers. Safe and easy to use simply slide across the edge of the trowel to instantly align and flatten the edge. The filer is made in the United States of highimpact ABS material, and includes a two-sided, high-quality file. Replacing a file is quick and easy. For righthanded use. For more information, call (800) 221-0516, or visit www.northerntool.com.
Pave Tech Inc.
Prior Lake, Minn.
The Tumbler Hammer was designed to be used on saw cut surfaces of pavers, blocks, caps or retaining wall blocks to give them the tumbled look. It has serrated teeth on both ends, with 25 points on one side and 36 points on the other. It is the easiest way to create a "split face" when a splitter is not available. Overall length is 14.25 inches. For more information, call (800) 728-3832, or visit www.pavetech.com.