Bon Tool Co.
Bon's stainless steel, wide bit brick hammer is a premium masonry hammer with a striking head that is made from precision-formed stainless steel. The stainless steel head is stronger than those made of carbon steel, alloy steel and even titanium steel, and resists rust and corrosion. During the manufacturing process, the head of the hammer is triple heat treated, which adds more durability, helps the head absorb shock, and gives the hammer a tougher hitting surface. It is finished with a hickory handle that is sealed with three coats of patented UV finish to resist wear. The hammer weighs 20 ounces and features a 2-1/4-inch-wide bit blade. For more information, call (724) 443-7080, or visit www.bontool.com.
With a 13.6 AMP, 6,000 RPM high-speed motor, the wet diamond core drill Model END 1521 P completes holes 50-percent faster, but allows drilling without the "blow out" and micro fractures that commonly occur with the percussion action of rotary hammers in granite, natural stone and concrete. This unit drills without shock, dust or vibration, and its centering aid will ensure accurate drilling. There also is a vacuum connection for collecting the slurry. The drill comes with three bits (1/2-, 5/8- and, a built-in GFCI and a metal storage case. Diamond core bits in 3/8- to 1-1/4-inch diameter are also available. For more information, call (800) 700-5919, or visit www.csunitec.com.
Hohmann and Barnard Inc.
Hohmann & Barnard is pleased to announce the introduction of FLEX-FLASH EDGE a widely specified, Elvaloy-based peel-and-stick FLEX-FLASH flashing with an integrated copper drip edge. The copper strip is embedded into the edge of the flashing membrane, but is not visible, so there is no concern about oxidation. Membrane flashing materials typically are too resilient to bend into a lasting drip-edge when projecting beyond the face of the wall. By embedding a narrow copper strip into the edge, FLEX-FLASH EDGE can then be easily formed on site into a typical 3/8- to 1/2-inch drip edge that will endure. For more information, call (800) 645-0616, or visit www.h-b.com.
Husqvarna Construction Products
The Husqvarna TS 400 is a universal masonry saw with a unique height adjustment device that is lockable in any position. Featuring a laser pointer to allow for easier positioning and exact cuts, the TS 400 also has a head that is easily adapted for 12- (200mm), 14- (350mm) and 16-inch (400mm) blades. The head also oscillates with a gas-operated jack for smooth positioning that can be locked in any position, and tilts up to 45 degrees for miter cutting. The stand quickly converts to a two-wheel cart for easy transport by one person. The detachable slurry collection tray makes clean up easier and improves pump life. For more information, call (913) 928-1000, or visit www.husqvarnacp.com.
Mr. Mail Safe
Mr. Mail Safe is a Texas-based manufacturer of heavy-duty, locking mailboxes that are designed to be bricked in (they can also be attractively post mounted). The mailboxes prevent mail theft and identity theft, which are the fastest growing crimes in the United States. The new MMS 300 can hold packages up to 12 inches x 10 inches x 8 inches. The mailboxes are made from welded, heavy-gauge steel and stainless steel, and come with a limited lifetime warranty. Some dealer territories available. For more information, call (972) 533-8855, or e-mail firstname.lastname@example.org.
Sakrete Bonsal American
Specifically made for the commercial and residential building construction market, ProSpec brings together the Bonsal masonry, concrete restoration and repair, and tile installation product lines under one roof. Products for the masonry market include mortars, grouts and finishing products. With ProSpec, there is the added benefit of the full line of Sakrete products, as well as a wealth of expertise and experience to meet the needs for a complete range of applications, for both commercial and residential. For more information or to reach the technical service support group, call (800) 334-0784, or visit www.prospec.com.
Does your company have a new product?
Return to Table of Contents