Home Page of Masonry Magazine

Advertise to mason contractors

Subscribe to Masonry Magazine
Sponsors of Masonry Magazine
Classified Advertising for Mason Contractors
Contact Masonry Magazine
Search Masonry Magazine
Order reprints of Masonry Magazine
News for masonry contractors
Calendar of masonry events
Links to masonry related sites
Web site of the Mason Contractors Association of America
Web site of the Mason Contractors Association of America
Sponsored topics:
Mortar & Restoration NEW!
Masonry Magazine Readership Survey

December 2007

Connectors, Anchors and Fasteners

Side Story:
Product Watch
CoreLock by Wire-Bond
to the Rescue

Masonry Magazine

Wire-Bond, manufacturer of masonry wall reinforcing, anchors and accessories, recently introduced the CoreLock series of rebar positioners. The CoreLock Rebar Positioner fits inside the wall reinforcing and down into the CMU core. This recess of 1 1/4-inch into the core, as well as the diagonal design of the positioner, secures it down in the core. Once installed, it cannot be bumped or misaligned. Placement of the rebar in the middle of the core is assured, which results in labor savings.

Different styles are available to suit the needs of most wall sizes and applications. The figure-8 design is available for six — through 12-inch blocks. Double figure-8 designs are available for multiple bars. The Big O Positioner has a larger hole that can help simplify lapping, while keeping the rebar centered.

Positioners are packaged in a tangle-proof box for easy installation on the job. Available in mill galvanized, hot dipped and stainless steel. For more information, visit www.wirebond.com.



©2007 by the Mason Contractors Association of America
All rights reserved
33 South Roselle Road, Schaumburg, IL 60193
Phone: 847-301-0001 or 800-536-2225 | Fax: 847-301-1110

Web site by: Lionheart Publishing, Inc.
506 Roswell Street, Suite 220, Marietta, GA 30060
Phone: 770-431-0867 | Fax: 770-432-6969